Long Span ADSS Fiber Optic Cable 200-1000m

Long Span ADSS Fiber Optic Cable 200-1000m Long Span ADSS Cables are principally used for aerial installations – typically on roadside power distribution poles. Being totally non-metallic, this product is ideal for applications in close proximity to power distribution lines.

Tags: adss cable, adss fiber, ADSS Fiber Optic Cable, Aerial Optical Cable, Fiber Optic Cable Outdoor

Long Span ADSS Fiber Optic Cable 200-1000m
Long Span ADSS Fiber Optic Cable 200-1000m Long Span ADSS Cables are principally used for aerial installations – typically on roadside power distribution poles. Being totally non-metallic, this product is ideal for applications in close proximity to power distribution lines. This product is also suited to single point suspension applications where the product has to support either a higher load than conventional terrestrial cable or a permanent or varying tensile load, applied through the outer sheath. Standard pole-mounting hardware is readily available for this product.

A long span ADSS fiber optic cable has an outer jacket, a central tension rod member, and gel-free buffer tubes stranded around the rod member. Each tube is made of a flexible material having a determined elastic modulus, and optical fibers are contained in each tube with a water absorbent material. Water blocking yarns fill voids between the buffer tubes and surround the tubes. An inner jacket envelops the tubes and the yarns, and additional yarns are provided between the inner and the outer cable jackets. The elastic modulus of the buffer tubes is sufficiently high so that the cable sustains a compressive load of at least 220 N/cm over ten minutes with not more than a 0.1 dB increase in attenuation in any fiber. The rod member and the yarns enable the cable to span a distance of approximately 500 to 1050 feet in a NESC Heavy Load district.

Features:
Fully self-supporting – no messenger wire or lashing required
Hardware & accessories available
Custom designs available for longer span lengths or other fibre counts
Applications:
Utilised for telecommunications by power utilities, telcos, and private network groups
Designed for installation on distribution lines